OAV Equipment and Tools, Inc.

In the 21st century business is more competitive than ever before. The key to success is the ability to produce stable and good quality products and sell them at affordable prices in the markets. OAV Equipment and Tools, Inc. has improved and strengthened its corporate structure to meet today’s challenges and modern manufactures and factories.

Veneer Processing Machine

OAV Equipment and Tools, Inc. ensures all of our Sliding Table Saw, Panel Saw, Circular Saw are affordable and priced competitively with other similar products on the market. Veneer Processing Machine is committed to quality, innovation, and service through our knowledgeable team that is dedicated to exceeding customer expectations.

UltiMate

CROSSFEED VENEER SPLICER

The UltiMate crossfeed splicing machine is designed for glue-spliced joint for long and panel-sized veneer faces. The pre-glued veneer strips are fed into the machine manually with feeding stoppers for fast and easy operation. The integrated cut-to-size clipper at the outfeed section is for the designed-width faces. Operators can also select the endless splicing model for jointing certain numbers of veneer strips. The production output of the crossfeed splicing machine is approximately 6 ~ 7 times faster than the longitudinal splicing machine. Together with our Double Sided Veneer Glue Applicator, GlueMate, and Veneer Fanning Machine, FanningMate, a full set of veneer splicing line is completed.

VeneerPlus, LVS-1250 Series

LONGITUDINAL VENEER SPLICER(Integrated Gluing System Inside)

The VeneerPlus is particularly suitable for the furniture industry and automatic production runs. To accomplish this work, a specially designed gluing device is mounted between the feeding rollers and transporting conveyors. This enables users to feed veneers right after veneer edges are cut straight eliminating the pre-gluing process. The infeed rollers will accurately align the veneer to the gluing unit and then transport the glued veneers to the heating section. In this case, the veneer gluing and splicing work can be accomplished within one single machine. Standard Accessory - Cooling System for Glue-pot To extend the pot-life of the mixed glue, a cooling system is mounted on the bottom of the glue-pot.

VeneerMate, LVS-1250 Series

LONGITUDINAL VENEER SPLICER

The VeneerMate is designed to splice high end veneers. This machine enables users to accurately and firmly bond the veneer edges with no visible joint line.

As opposed to the traditional splicing machine equipped with stitching threads or taping papers, this VeneerMate Longitudinal Veneer Splicer applies specially designed heating and pressing mechanisms eliminating visible joint lines on the surface of wood piece and resulting in a perfect seamless joint from one single pass.

VeneerSolid 950

LONGITUDINAL VENEER SPLICER

The VeneerSolid 950 is an entry-level machine ideal for "custom shops" with lighter application requirements (less than 8 hours run time per day). And this VeneerSolid 950 also meets all the splicing performance features of INNOVATOR veneer splicing machine.

This machine enables users to avoid troubles caused by the traditional glue-thread splicing method. This machine is capable of splicing components for Diamond Match applications. The infeed rollers will accurately align the veneer by means of photocell censer to avoid uneven alignment at the front end of veneers.

GlueMate

Double Sided Veneer Glue Applicator

The GlueMate ensures precise application of adhesive to the edges of veneer bundles eliminating airborne contaminants and operation inconsistency. Both Urea based or PVAc glue work well with GlueMate. Coupled with Innovator's both crossfeed and longitudinal splicers, a perfect veneer splicing job can be achieved.

Standard Accessory - Cooling System for Glue-pots
To extend the pot-life of the mixed glue, a cooling system is mounted on the side of each glue-pot.


FanningMate

VENEER FANNING MACHINE

The FanningMate is designed to fan pre-glued veneer bundles. Unlike manual fanning, this fanning machine offers a solution to avoid the pre-glued veneer leaves from sticking together. The FanningMate is usually positioned as the second station after the pre-glued veneer bundle has exited our GlueMate. It can also be employed as a "stand alone" station after a manual pre-gluing process.

CutMate 2800 & 3200

VENEER GUILLOTINE

Thanks to our partner, SAVI Industries from Denmark, INNOVATOR Machinery is now building SAVI guillotines in Taiwan with the original technology and know-how being transferred.

F-15

Thin Cutting Fram Saw

Designed For Profitable Production
The F15 Thin-Cutting Frame Saw from Mick & Jack is designed and engineered to enhance the high efficiency and high accuracy cutting. In addition to provide various cutting modes, the F15 also features great material -cost saving that creats profits for customer. The machine is equipped with a micro- computer control for maximum operational convenience.

Various Sawblades For Choice
  • Upon request, the machine can be supplied with steel welded sawblade or supported steadily, ensuring T.C.T. sawblade for choice.
  • The customer may choose various sawblade thickness from 1.1 to 1.4 mm to suit various wood materials.

We test our products on various quality parameters to ensure the quality of our products. Besides this, through offering products competitive prices and adhering to on time delivery schedule, we have developed healthy business relationship with our variegated clients. If you are looking for suppliers and long-term mutually beneficial partnership, our company is ready to offer Sliding Table Saw and Veneer Processing Machine.