VeneerSolid 950
縱向單板薄片拼接機
The VeneerSolid 950 is an entry-level machine ideal for "custom shops" with lighter application requirements (less than 8 hours run time per day). And this VeneerSolid 950 also meets all the splicing performance features of INNOVATOR veneer splicing machine.
This machine enables users to avoid troubles caused by the traditional glue-thread splicing method. This machine is capable of splicing components for Diamond Match applications. The infeed rollers will accurately align the veneer by means of photocell censer to avoid uneven alignment at the front end of veneers.
This machine enables users to avoid troubles caused by the traditional glue-thread splicing method. This machine is capable of splicing components for Diamond Match applications. The infeed rollers will accurately align the veneer by means of photocell censer to avoid uneven alignment at the front end of veneers.
Veneer Condition | |
Veneer Strip Thickness (depending on veneer condition) |
approx. 0.35 ~ 1.5 mm (other thickness upon request) |
Veneer Strip Length | 200 ~ 3000 mm |
Veneer Strip Width | 50 ~ 1240 mm |
Veneer Moisture Content | approx. 8 ~ 12 % |
Machine Specification | |
Production Speed | up to 30 meters/min. (depending on veneer condition & thickness) |
Electric Power | approx. 3.5 kw |
Compressed Air | 5 kgs/cm2 |
Heating Temperature | 100 ~ 220 |
Heating Zone | 800 mm |
Machine Dimensions (L x W x H) | 1500 x 1500 x1400 mm |
Net Weight | approx. 900 Kg |
*Technical data is not binding and can be modified without prior notice.