木工机械
SHG-908U.C.D 四面刨木机
仕兴持续的致力于研究与发展新产品、并以稳定性能和提高方便性为其最终设计目标。我们提供一贯高规格的磨刀机、裁板机、集尘机、四面刨木机、砂光机、作榫机、自动裁板机、钻孔机、木材切断锯、封边机、旋臂吊锯机、四面刨木机 (全罩式护罩)、带锯机、立轴机、直线纵锯机、作榫机自动仿型边机和单板薄片加工机,仕兴机械工业股份有限公司以30年以上相关经验、持续且积极开发及提供优质产品、并致力于提供完善的客户服务、以达到企业永续经营之目的。如果您有这方面的需求,欢迎与我们联络!
Etc.SHG-908U.C.D(9" 机器类型 (重型))
9" (230mm) width capacity
8 spindles
Etc.SHG-908U.C.D(9" 机器类型 (重型))
9" (230mm) width capacity
8 spindles
- Floating table rollers.
- Inserted alloy steel table.
- Mechanical digital readout.
8 SPINDLE ARRANGEMENT | ||||
original |
||||
OUTSTANDING FEATURES FROM
POM 4 - SIDE MOULDER
- Major parts of the machine are manufactured from high tensile ductile iron for high durability and rigidity.
- Feed rollers are precision machined from ductile iron, hardened for high durability.
- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Spindles are precision manufactured from Nickel Chrome Molybdenum alloy steel. Computerized dynamically balanced for smooth running at high speed.
- The spindle and quill are hard chrome plated and precision ground.
- Additional feed rollers make feeding problem stock easy.
- Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.
- A specially designed gear box provides high torque output accurate transmission and a long service life.
- COMPREHENSIVE SAFETY FEATURES: - Circuit will break if the cutterhead is touched. - The photocell sensor detects elevation of the entire feeding mechanism. - The end switch allows for convenient machine running tests.
- The pulleys and motors are dynamically balanced to ensure added stability for the entire machine.
- Convenient lubrication for all spindle bearings.
- Anti-rust treatment for the machine frame.
Look into the difference in the POM 4-SIDE Moulders
Extraording Performance.
-
FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates a floating roller, for outstanding smoothness during stock feed. -
INSERTED ALLOY STEEL TABLE
Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance. -
MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting. -
SHORT STOCK FEED ROLLER
The additional feed rollers are fitted at the front of the 2nd spindle, suited for smooth feeding of short stock. positively and smooth feeding.
OPTIONAL:
-
UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 360* for moulding operations. -
FULL GROOVE TABLE (Optional)
Fitted between the 1st spindle and the initial spindle on the rear bottom spindle set. -
FEED MAGAZINE (Optional)
This feed magazine enables continuous automatic stock feed that greatly increases efficiently. -
TILTING FEED ROLLER (Optional)
This allows for moulding of bevelled workpieces and picture frames et cetera.
-
FREQUENCY INVERTER (Optional)
The feed speed is controlled by a frequency inverter providing variable speed feed. -
FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations.
MODEL | SHG-908U.C.D |
Maximum width of cut | 230mm |
Maximum height of cut | 125mm |
Horziontal top spindle motor | 7.5HP,10HP |
Horziontal bottom spindle motor | 7.5HP,10HP |
Right vertical spindle motor | 7.5HP |
Left vertical spindle motor | 7.5HP |
Feed drive motor | 7.5HP |
Elevation motor | 1HP |
Spindle speed | 6000R.P.M. |
Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
Spindle diameter | 50mm |
Universal spindle diameter | 40mm |
Standard cutter diameter | 125mm |
Maxi 1st bottom spindle diameter | 155mm |
Maxi Right vert. spindle diameter | 180mm |
Maxi Left vert. spindle diameter | 180mm |
Maxi Horz. top spindle diameter | 180mm |
Maxi Rear bottom spindle diameter | 180mm |
Net weight | 5200kgs |
Gross weight | 5800kgs |
Packing dimensions | 5743x1950x1830mm |
Universal spindle (Option) | 10HP,7.5HP |
Multiple rip saw (Option) | 20HP,25HP,30HP |
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.