木工机械
SHG-806U.C.D /6 主轴配置四面刨木机
主轴配置四面刨木机为我们的热销产品之一，欢迎洽询。
因应全球化木工机械市场的需求、仕兴机械工业股份有限公司以30年以上相关经验，我们提供一贯高规格的带锯机、裁板机、集尘机、四面刨木机、四面刨木机 (全罩式护罩)、自动仿型边机、自动裁板机、钻孔机、木材切断锯、封边机、旋臂吊锯机、砂光机、磨刀机、立轴机、直线纵锯机、作榫机和单板薄片加工机，提高了生产效率、确保能准时将产品送达。如果您有这方面的需求，欢迎与我们联络！
Etc.SHG-806U.C.D /6 主轴配置(8" 机器类型 (重型))
8" (200mm)width capacity 6 spindles
8-SPINDLE
因应全球化木工机械市场的需求、仕兴机械工业股份有限公司以30年以上相关经验，我们提供一贯高规格的带锯机、裁板机、集尘机、四面刨木机、四面刨木机 (全罩式护罩)、自动仿型边机、自动裁板机、钻孔机、木材切断锯、封边机、旋臂吊锯机、砂光机、磨刀机、立轴机、直线纵锯机、作榫机和单板薄片加工机，提高了生产效率、确保能准时将产品送达。如果您有这方面的需求，欢迎与我们联络！
Etc.SHG-806U.C.D /6 主轴配置(8" 机器类型 (重型))
8" (200mm)width capacity 6 spindles
- Floating table rollers.
- Inserted alloy steel table.
- Mechanical digital readout.
8-SPINDLE
- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.
- Additional feed rollers make feeding problem stock easy.
- A specially designed gear box provides high torque output accurate transmission and a long service life.
- COMPREHENSIVE SAFETY FEATURES: - Circuit will break if the cutterhead is touched. - The photocell sensor detects elevation of the entire feeding mechanism. - The end switch allows for convenient machine running tests.
- Anti-rust treatment for the machine frame.
Mechanical digital readout shown in picture is optional.
-
FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates a floating effect, for outstanding smoothness during stock feed. Choice of 4 or 5 floating rollers. -
INSERTED ALLOY STEEL TABLE
Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance. -
MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting.
OPTIONAL:
-
FULL GROOVE TABLE (Optional)
Fitted between the 1st spindle and the initial spindle on the rear bottom spindle set. -
UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 240° for moulding operations. -
FEED MAGAZINE (Optional)
This feed magazine enables continuous automatic stock feed that greatly increases efficiently. -
FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations.
MODEL IDENTIFICATION
U: Floating table roller
C: Inserted alloy steel table
D: Mechanical Digital readout
V: Fully enclosed splash guard
X: Horizontal spindle support
H: Universal spindle
S: Short stock feed roller
G: Full groove table
F: Feed magazine
T: Tilting feed roller
I: Frequency inverter
U: Floating table roller
C: Inserted alloy steel table
D: Mechanical Digital readout
V: Fully enclosed splash guard
X: Horizontal spindle support
H: Universal spindle
S: Short stock feed roller
G: Full groove table
F: Feed magazine
T: Tilting feed roller
I: Frequency inverter
| MODEL | SHG-806U.C.D |
| Maximum width of cut | 200mm |
| Maximum height of cut | 125mm |
| Horziontal top spindle motor | 7.5HP,10HP |
| Horziontal bottom spindle motor | 7.5HP,10HP |
| Right vertical spindle motor | 7.5HP |
| Left vertical spindle motor | 7.5HP |
| Feed drive motor | 7.5HP |
| Elevation motor | 1HP |
| Spindle speed | 6000R.P.M. |
| Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
| Spindle diameter | 40mm |
| Standard cutter diameter | 125mm |
| Maxi 1st bottom spindle diameter | 155mm |
| Maxi Right vert. spindle diameter | 180mm |
| Maxi Left vert. spindle diameter | 180mm |
| Maxi Horz. top spindle diameter | 180mm |
| Maxi Rear bottom spindle diameter | 180mm |
| Net weight | 4200kgs |
| Gross weight | 4800kgs |
| Packing dimensions | 5105x1780x1830mm |
| Universal spindle (Option) | 10HP,7.5HP |
| Multiple rip saw (Option) | 20HP, 25HP, 30HP |
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
