UltiMate 薄片机
横向单板薄片拼接机
The UltiMate crossfeed splicing machine is designed for glue-spliced joint for long and panel-sized veneer faces. The pre-glued veneer strips are fed into the machine manually with feeding stoppers for fast and easy operation. The integrated cut-to-size clipper at the outfeed section is for the designed-width faces.
Operators can also select the endless splicing model for jointing certain numbers of veneer strips. The production output of the crossfeed splicing machine is approximately 6 ~ 7 times faster than the longitudinal splicing machine. Together with our Double Sided Veneer Glue Applicator, GlueMate, and Veneer Fanning Machine, FanningMate, a full set of veneer splicing line is completed.
- Pre-feeding Stoppers: To avoid mismatching in the beginning of feeding stage, a specially designed stopping system ensures users a “place-and-go” feeding operation for non-stop splicing work.
- User-friendly Control Panel: A “clear-and-easy” operation panel with user-friendly PLC based interface touch screen mounted right in the front of the machine allows users to reach the best production output.
- Back Clipper: This standard accessory ensures a precise “cut-to-size” veneer faces to be achieved.
- Pneumatic and Hydraulic System: The UltiMate is equipped with European-made pneumatic and hydraulic system for a highest quality.
- Hand-safety Guard: To avoid any human false against operator’s safety, a photocell safety guard is mounted to protect operators when the crossbeam is in downward movement. The UltiMate meets European CE safety requirements.
| Veneer Condition | UltiMate 2800 | UltiMate 3200 |
| Veneer Strip Thickness (depending on veneer condition) |
0.35 ~ 1.2 mm (other thickness upon request) |
0.35 ~ 1.2 mm (other thickness upon request) |
| Veneer Strip Length | 750 ~ 2800 mm | 750 ~ 3200 mm |
| Veneer Strip Width | 75 ~ 380 mm | 75 ~ 380 mm |
| Veneer Moisture Content | approx. 8 ~ 12% | approx. 8 ~ 12% |
| Machine Specification | ||
| Average Production Speed | up to 15 ~ 25 cycles/min. (depending on the veneer width and thickness of single sheet) |
up to 15 ~ 25 cycles/min. (depending on the veneer width and thickness of single sheet) |
| Electric Power | approx. 17 kw | approx. 18.5 kw |
| Compressed Air | 6 kgs/cm2, 95 L/min. | 6 kgs/cm2, 95 L/min. |
| Machine Dimensions (L x W x H) |
4250 x 1570 x 2054 mm | 4700 x 1570 x 2054 mm |
| Net Weight | approx. 5000 Kg | approx. 6000 Kg |
*Technical data is not binding and can be modified without prior notice.
