OAV MAX350MR
Edge bander for MDF / plywood / particle board production
Operating Panel with LED Keypad
- Glue Temperature settings
- Units can be selected and disengaged individually
- Touch screen as option
Pre-milling Unit
Two diamond milling heads make sure the workpiece edge is absolutely straight to the material of edge being glued.
Two diamond milling heads make sure the workpiece edge is absolutely straight to the material of edge being glued.
Glue Pot
The 1.2 kg Teflon-coated glue pot is designed for EVA hot-melt glue. The glue is applied with an adjustable glue roller.
The 1.2 kg Teflon-coated glue pot is designed for EVA hot-melt glue. The glue is applied with an adjustable glue roller.
Guillotine Shears
Coiled material up to 3 mm in thickness can be trimmed by the guillotine shears.
Coiled material up to 3 mm in thickness can be trimmed by the guillotine shears.
Pressure Roller
The unit is mechanically spring-loaded and due to the "Quick" setup system, can be adjusted exactly to the required edge thickness.
The unit is mechanically spring-loaded and due to the "Quick" setup system, can be adjusted exactly to the required edge thickness.
Flush & Radius end trimming
End radius trimming system, using a profile cutter forward and backward to trim radius end trimming and flush.
End radius trimming system, using a profile cutter forward and backward to trim radius end trimming and flush.
Top & Bottom trimming Unit
The adjustment of the settings from flush to beveled finish for thin edges, as well as radius trimming for thicker edges, is quick and easy. TC2 mm radius tool is included as standard.
The adjustment of the settings from flush to beveled finish for thin edges, as well as radius trimming for thicker edges, is quick and easy. TC2 mm radius tool is included as standard.
Radius scraping Unit
It leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.
It leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.
Buffing Unit
The buffing unit leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.
The buffing unit leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.
Premilling unit
Feeding chian
Preheating unit
Glue shaft
Guillotine shear
Pressure roller unit
Flush & Radius end trimming
Top & Bottom trimming Unit
Radius scrap unit
Buffing unit
| MODEL | MAX 350MR |
|---|---|
| Feeding speed | 7M/min |
| Panel Thickness | 10-45mm |
| Edge Thickness | 0.4-3mm |
| Mini. Panel width | 90mm |
| Mini. Panel length | 190mm |
| Working table height | 856mm |
| Extensible support width | 560mm |
| Extension connector Φ in mm | Φ4" (105mm) X3 |
| Total kW | 4.9 kW-3ph / 5.8kW-1ph |
| Pre-milling | 12000 rpm |
| Flush & Radius end trimming | 8800rpm |
| Top/Bottom trimming | 10500rpm |
| Buffing | 3400rpm(60HZ)/2800rpm(50HZ) |
| Overall Size (LxWxH) | 3200x1200x1200mm |
| Weight, N.W./G.W. | 528/660kgs (N.W./G.W.) |
| Container Qty' (20'/40') | 6/12 sets |
| Power (KW) of each motor | |
| Feeding Motor | 0.75kW(3ph), 0.94kW(1ph) |
| Pre-milling | 1.5 kW |
| Pre-heating | 0.125kW |
| Glue spindle motor | 0.25kW |
| Flush & Radius end trimming | 0.18kW |
| Top/Bottom trimming motor | 0.55kW(3ph), 1.13kW(1ph) |
| Upper/lower buffing motor (each) x2 | 0.12kW(3ph), 0.18kW(1ph) |
| Glue Pot heating (5 elements) | 1.315 kW |
