Pre-milling unit
The premilling station comes with two 1.1kw high frequency motors with counter rotating 60mm diameter diamond cutterheads which ensure perfect trimming of up to 60mm thick panels.
GLUING UNIT
1.5 kg capacity Teflon coated glue pot is suitable for both PUR and EVA glue. The precise glue quantity control allows for an optimal glue amount to be applied to the edge of the panel. Equipped with a quick change system for cleaning or multiple glue pots (on request). The automatic cleaning cycle cleans the glue spreader roll.
TAPE FEEDING DEVICE & STRIP FEED
Capable of feeding both coil and strips with the strip feed magazine. This automatic edge infeed device is designed for fast change over between coil and solid wood edge up to 6 mm.
PRESSURE ZONE
The rotating pressure roller section guarantees an optimal glue point. This heavy-duty pressure zone comes with 3 pcs steel rollers which can be quickly set to apply your various edge thickness. The pressure section ensures the proper bond of the edge to the substrate.
DUST COLLECTING BOX
Collects the trimming from the scraping
unit in a separate storage comportment
so they are not collected in to the dust
collector where they could impede the
impeller fan.
END TRIMMING UNIT
Precision dual motor high frequency
end cutting units travel on precision
linear guides for flush end trimming of
the panel. Motors can be set to straight
or chamfer 15° automatically from the
control panel.
TOP & BOTTOM TRIMMING UNIT
The innovative design of this unit allows
for precise results regardless of the type of edge and panel you are using.
The two high frequency motors can be
tilted for bevel 15° or straight cutting.
The multi-functional cutters can be set
up for flush trimming, bevel trimming, or
radius trimming.
CORNER ROUNDING UNIT
The innovative design of this unit
allows you to get a precision end
rounding on your panel every time
without cutter marks. Optimum corner
rounding without adjustment or set-up,
resulting from the combination of a
diamond tool and tracer roller. Capable
of corner rounding workpieces up to
60mm in thickness.
RADIUS SCRAP UNIT
This unit with its user-friendly design is able to eliminate any knife marks left on the edge after profiling on the top & bottom trimmers. It can be easily excluded when processing edges not requiring the radius scraper.
BUFFING UNIT
Two Independent buffing wheels for cleaning & polishing can be adjusted to a particular angle to maximize its effect for better workpiece _finishing & extending buffing wheel service life. The buffing units are designed to polish edges and maintain their natural colors.
AUTOMATIC PRESSURE BEAM
The height of the pressure beam can
adjusted automatically according the
thickness of panel being.
NESTING
Nesting package includes a multi-roller tracing device for the top trimming and scraping unit to compensate for hinge holes.