MAX570P

Edge Banding Machine 【Used in the production of fire doors】
Select Merchandise

MAX 570P is equipped with a user-friendly touch screen control. The PLC parameter setting & operating controls ensure reliable and stable working conditions to provide consistent & high-quality results. This is the ultimate edge banding solution to optimize your investment and take your production output to the next level.

OAV is the world's leading manufacturer of woodworking machinery and equipment. The precision sliding table saw solves the problems of traditional cutting board size errors and cracks. Accurate cutting shortens the working hours, whether it is a small amount of variety or a large amount of cutting, it can quickly meet the needs of customer orders. The fully automatic linear edge banding machine makes a perfect combination for the lamination of plates and edge strips. High-end product MAX570P combined with automatic solid wood edge strips, transparent glue on the plastic bucket is the best weapon for the production of fire doors.

OAV products marketing in 65 countries around the world is your trusted brand. From panel production to edge banding, the intelligent touch screen optimizes the accuracy and strictly controls every step of the production, so that The quality can reach the maximum guarantee. OAV Machinery not only helps you produce products, but also a good helper in your pursuit of "craft".
Pre-milling unit
The premilling station comes with two 1.1kw high frequency motors with counter rotating 60mm diameter diamond cutterheads which ensure perfect trimming of up to 60mm thick panels.
Gluing Unit 
1.5 kg capacity Teflon coated glue pot is suitable for both PUR and EVA glue. The precise glue quantity control allows for an optimal glue amount to be applied to the edge of the panel. Equipped with a quick change system for cleaning or multiple glue pots (on request). The automatic cleaning cycle cleans the glue spreader roll.

Tape Feeding Device & Strip Feed 
Capable of feeding both coil and strips with the strip feed magazine. This automatic edge infeed device is designed for fast change over between coil and solid wood edge up to 6 mm.

Pressure Zone 
The rotating pressure roller section guarantees an optimal glue point. This heavy-duty pressure zone comes with 3 pcs steel rollers which can be quickly set to apply your various edge thickness. The pressure section ensures the proper bond of the edge to the substrate.
Dust Collecting Box 
Collects the trimming from the scraping unit in a separate storage comportment so they are not collected in to the dust collector where they could impede the impeller fan.
End Trimming Unit
Precision dual motor high frequency end cutting units travel on precision linear guides for flush end trimming of the panel. Motors can be set to straight or chamfer 15° automatically from the control panel.
Top & Bottom Trimming Unit
The innovative design of this unit allows for precise results regardless of the type of edge and panel you are using. The two high frequency motors can be tilted for bevel 15° or straight cutting. The multi-functional cutters can be set up for flush trimming, bevel trimming, or radius trimming.
Corner Rounding Unit
The innovative design of this unit allows you to get a precision end rounding on your panel every time without cutter marks. Optimum corner rounding without adjustment or set-up, resulting from the combination of a diamond tool and tracer roller. Capable of corner rounding workpieces up to 60mm in thickness.
Radius Scrap Unit
This unit with its user-friendly design is able to eliminate any knife marks left on the edge after profiling on the top & bottom trimmers. It can be easily excluded when processing edges not requiring the radius scraper.
Buffing Unit 
Two Independent buffing wheels for cleaning & polishing can be adjusted to a particular angle to maximize its effect for better workpiece _finishing & extending buffing wheel service life. The buffing units are designed to polish edges and maintain their natural colors.

Automatic Pressure Beam
The height of the pressure beam can adjusted automatically according the thickness of panel being.
Nesting 
Nesting package includes a multi-roller tracing device for the top trimming and scraping unit to compensate for hinge holes.
MODEL MAX570P
Feeding speed 11 M/min.
Panel Thickness 8-60 mm
Edge Thickness 0.4-3 mm
wood strip thickness 6mm (max)
Mini. Panel width 120 mm
Mini. Panel length (without corner rounding) 150 mm
Corner rounding Mini. Panel length (height 8~30mm) 220 mm
Corner rounding Mini. Panel length (height 30~60mm) 250 mm
Working table height 960 mm
Extensible support width 565 mm
Extension connector dia. in mm 5" (125 mm)
Motor
Pre-milling 12000 rpm
Front/rear trimming 12000 rpm
Up/down trimming 12000 rpm
Corner rounding 12000 rpm
Buffing 3000 rpm
Overall Size (L x W x H), N.W/G.W.: 4450 x 1160 x 1520 mm, 1040kgs/1250kgs
Total motor power 11 kw
Feeding motor 2.2 kw
Glue pot heating (5 elements) 1.45 kw
Pre-milling motor 1.1 kw x 2
Pre-heating 0.4 kw
Glue spindle motor 0.25 kw
Front/rear trimming motor 0.37 kw x 2
Upper/lower trimming motor (each) 0.37 kw x 2
Corner rounding motor 0.37 kw
Upper/lower buffing motor (each) 0.12 kw x 2
  • Country of Origin : Taiwan
  • Main Export Markets : North America, Europe, South America, Asia, Africa and others.
  • Delivery Details :
  • Others : Guarantee: 1 year guarantee
    Service: operation manuals, videos support, on-line training and service.
    Product application: workshop, cabinet maker, turkey line, woodwork design, craftsmanship, panel technology, furniture, holz, architecture
    Member : TWMA Taiwan woodworking Machinery Association

relevant information

Hot Merchandise

MAX340M

Edge Banding Machine, Edgebander
OAV's brand new Edge Bander MAX340M combines an excellent user experience with top-quality ...
Hot Merchandise

MAX350M

Edge Banding Machine with premilled unit top sales
OAV's Edge Bander MAX350M is the compact machine choice with pre-milling function.
In coils ...
Select Merchandise

MAX370P

Edge Banding Machine
OAV edge bander MAX370P is the industrial choice which is with CORNER ROUNDING function. C ...

Recommendations For You

CF-60S

MULTIPLE ROUND ROD MILLING MACHINE
* Designed for cutting stick from square into round rod, cutting stick up to 60mm in diam ...

BS888

Radial Arm Saw

Inquiry

View Picture
Selected Items
Estimate Purchasing Quantity
Estimate Purchasing Schedule
Select Merchandise
Edge Banding Machine 【Used in the production of fire doors】, MAX570P

MAX570P

Edge Banding Machine 【Used in the production of fire doors】
MAX 570P is equipped with a user-friendly touch screen control. The PLC parameter setting ...
Information of Contact Person
Company Information

( Including http:// )

(Please enter full telephone number, including Country code, Area code.)

(Please enter full telephone number, including Country code, Area code.)

Others

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.