Edge Banding Machine
  • Facebook
  • LINE
  • Twitter
  • Sina
  • LinkedIn
Edge Bander


Edge Banding Machine

(1) PLC control system with LED display and keypad
(2) Work-piece is fed by chain
(3) Edge coil support plate: Ø 800 mm, for PVC/ABS
(4) Edge feeding is automatic for roller materials with a thickness of 0.4–3 mm; strip material can be hand-fed
(5) Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
(6) Teflon-coated hot-melt glue pot
(7) Spring loaded pressure unit with 1 pressure roller and 1 free moving roller
(8) 12,000 rpm, 0.22 kW end trimming unit, with Ø 100 mm TC-Saw blades
(9) 12,000 rpm, 0.37 kW flush trimming, radius trimming and bevel trimming unit
(10) Radius scraper + 3,000 RPM buffing unit
(11) Tooling for 2 mm radius
(12) Heavy duty pressure beam with extendable work-piece support
Operating panel with LED keypad
- Glue temperature settings
- Units can be selected and disengaged individually
- Heated fence is standard
Guillotine Shears
Coiled material up to 3 mm in thickness can be trimmed by the guillotine shears.
Edge feeding for coiled materials
Edge feeding is automatic for roller materials with a thickness of 0.4–3 mm
Glue Pot
The 1.2 kg Teflon-coated glue pot is designed for EVA hot-melt glue. The glue is applied with an adjustable glue
Pressure Roller
The pressure roller unit consists of one large roller, followed by a smaller one. The unit is mechanically spring-loaded and due to the “Quick” setup system. The adjustable spring system allows for a perfect bond between the panel and edge every time.
Heavy-duty chain feeder
The steady work-piece feeding mechanism is comprised of a chain and set of drive rollers, which will leave no scratches on the work-piece surface.
End Cutting Unit
The unit is mounted on high-precision linear bearings, ensuring perfect cutting results for years to come. The high frequency 12,000 RPM motor meets any challenge, regardless of edge type and thickness
Scraping Unit – Radius Scraping Unit
The scraping unit fine-tunes the edge radius and removes excess glue.
Flush and Radium Trimming Unit
The biggest advantage of the new multi-functional combination unit is the amount of space it saves in the machine. The adjustment of the settings from flush to beveled finish for thin edges, as well as radius trimming for thicker edges, is quick and easy. TC 2 mm radius tooling is included as standard.
Buffing Unit
The buffing unit leaves a super finish on ABS and PVC edging, and removes any discoloration on the edges, which is especially noticeable when working with dark edge material.

Feeding speed 9M/min.
Panel Thickness 8-45mm
Edge Thickness 0.4-3mm
Mini. Panel width 90mm
Mini panel length 170mm
Working table height 850 mm
Extensible support width 560 mm
Extraction connector Ø in mm Ø5"
Motor 5.5 kw
Overall Size 3,220 x 1,485 x 1,370 mm
Weight, kg (with standard equipment) 510 kgs/ 558 kgs (N.W./G.W.)
Packing size 2,290 x 720 x 1,360 mm
Container Qty (20'/40') 8 sets/ 16 sets
up/down 12,000 r.p.m.
front/rear 12,000 r.p.m.
buffing 3,000 r.p.m.
Power (kW) of each motor
Feeding motor 0.75 (Kw)
glue spindle motor 0.18 (Kw)
front/rear trimming motor 0.22 (Kw)
upper trimming motor 0.37 (Kw)
lower trimmign motor 0.37 (Kw)
upper buffing motor 3 ph-0.12 kw; 1 ph-0.18 kw
lower buffing motor 3 ph-0.12 kw; 1 ph-0.18 kw
pre-heating 0.4 (Kw)
glue pot 1.315 (Kw)
Ctn Q'ty (20/ 40') 8/16 sets

    Contact Us