Beam Saw (Automatic Panel Saw)
  • Facebook
  • LINE
  • Twitter
  • Sina
  • LinkedIn
Beam Saw


Beam Saw

Manual Operated Series: 8', 10' and 12' Capacity
  • Advanced Saw Carriage
    The saw carriage feed is driven by rugged wire.It is fitted with a shock absorbing cylinder to prevent bumping while it travels to the left side. The scoring blade may be laterally adjusted for a burr free cut or vertically adjusted for proper depth of cut as well as to compensate for blade wear.
  • Precise Saw Stroke Control Utilizing Optical Fiber Sensor
    The machine employs an advanced, high performance, optical fiber sensor. Its highly sensitive performance ensures extremely accurate saw stroke control.
  • Saw Darriage Drive Motor
    The saw carriage is driven by a 3HP AC motor. The saw carriage has 4 feed speeds which are changed by pulley.Saw carriage feed forward speeds are 12, 16, 21 and 26 meters per minute; and retract speeds are 24, 32,42 and 52 meters per minute.
  • Scoring Sawblade Adjustment
    The carriage sawblade can be adjusted vertically for depth of cut control. If wear occurs, adjust its position for compensation. The scoring sawblade can also be adjusted laterally for alijnment with main sawblade.
  • Panel Positioning by Cylinder (Optional)
    Two air cylinders are mounted at the outfeed side making it easy for handling the panel after cutting.
  • Piano-key Type Dust Guard (Optional)
    This sectional dust guard not only acts as a surrounding sawbiade guard, but also fully prevents sawdust from blowing out of the machine.
  • Floating Table(Optional)
    The floating tables are drilled with holes throughout their surface area and are fitted steel balls. Powerful blowers supply air into the holes,forcing the steel balls to protrude above the table surface, creating a floating effect. This bable surfaces are covered with bakelite to prevent scratching of penels during feeding.
Model OPS-8 OPS-10 OPS-12
Capacity Maximum length of cut 2,650 mm 3,250 mm. 3,850 mm
Maximum depth of cut 80 mm 80 mm 80 mm
Main Sawblade Blade diameter Ø355 mm Ø355 mm Ø355 mm
Arbor diameter Ø1" Ø1" Ø1"
Speed 4,800 r.p.m. 4,800 r.p.m. 4,800 r.p.m.
Scoring Sawblade Blade diameter Ø160 mm Ø160 mm Ø160 mm
Arbor diameter Ø1" Ø1" Ø1"
Speed 6,500 r.p.m. 6,500 r.p.m. 6,500 r.p.m.
Saw carriage Feed forward speed 12-16-21-26 M/min 12-16-21-26 M/min 12-16-21-26 M/min
Retract speed 24-32-42-52 M/min 24-32-42-52 M/min 24-32-42-52 M/min
Motor Main sawblade 13 HP 13 HP 13 HP
Carriage drive 3 HP 3 HP 3 HP
Working air pressure 5~6kg/cm2 5~6kg/cm2 5~6kg/cm2
Table height from floor 820 mm. 820 mm. 820 mm.
Net weight 2,200kgs 2,400kgs 2,600kgs
Gross weight 2,600kgs 2,900kgs 3,200kgs
Machine dimensions (LxWxH) 206"x132"x72" 230"x132"x72" 253"x132"x72"
Packing dimensions (LxWxH) 218"x40"x59" 230"x40"x59" 260"x40"x59"

    Contact Us