OAV EQUIPMENT & TOOLS, INC.
With the trend towards more open world markets and transfer of information, business today is more competitive than ever before. The key to survival is the ability to produce quality products cost effectively. OAV Equipment and Tools, Inc. has improved and strengthened its enterprise structure to achieve more competitive operation capability. Since its establishment in 1980, OAV has been committed to business perpetuity and has grown continuously. Today, OAV continues this process with new facilities, diversified products, and rigorous quality control systems. However, there is more to OAV than just modern manufacturing facilities. Excellent personnel are a vital contributing factor to the success of OAV
Home
Company Profile Product Line New Product Contact us

Others

Welcome ! This category contains detailed information for Others products. New Others products will be constantly updated in and added into this category.

Categories  > Others

 

 

( HEAVY DUTY MODELS )
31/2' CAPACITY PR-1100D / PR-1100A / PR-1100DA / PR-1100DDA
4' CAPACITY PR-1300D / PR-1300A / PR-1300DA / PR-1300DDA
INSUFFICIENT PRESSURE
PROTECTION
In case insufficient working air pressure occurs, the machine brakes
automatically for safety guard.		 CONVEYOR BELT TRACKING
CONTROL
The conveyor belt tracking is
pneumatically controlled to effectively
prevent out-of-track.

2' CAPACITY PR-600D / PR-600A / PR-600DA / PR-600DDA
3' CAPACITY PR-900D / PR-900A / PR-900DA / PR-900DDA

 
D TYPE A TYPE DA TYPE  
   
DDA TYPE   DAA TYPE  
PANEL CLEANING BRUSH ROLLER
Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel.		 SANDING BELT QUICK CHANGE
DEVICE
The sanding belt is changed quickly for
time saving and convenience.

CHECK THESE OUTSTANDING STANDARD FEATURES
Rugged Construction
The main frame is fabricated of heavy duty-steel plate and ribbed to minimize
vibration and deflection.
　
Convenient Controls
All operating controllers are centralized in a convenient control panel. Large, clearly
identified and color coded push buttons simplify set up and start-up.
　
Load Meter
Maintains constant check during operation to indicate percentage of full load on
motor. Conveniently mounted for immediate readout.
　
Emergency Stop Button
Large mushroom push button on control panel provides immediate stop
control of all operating systems.
　
Main Motor Drive
Heavy-duty rugged support of sanding head drive motor. Horsepower of motor
directly related to size and performance requirements of specific unit ordered.
　
Heavy-Duty Rubber Covered Contact Drum
Carefully designed and balanced to insure precise, chatter-free sanding. Covered
with proper durometer rubber for each application.
　
Spring Loaded Hold-Down Rolls.
Spring loaded hold-down rolls
Spring loaded pinch rolls are mounted at the infeed and outfeed of the
machine to insure positive feeding.
　
Hold-down plate
The hold-down plate is hard chrome treated for maximum wear resistance.
　
Variable Feed Speed
Sanders have variable feed speed as standard equipment.
　
Automatic elevation of conveyor table(Micro-computer controlled
with digital readout)
It accurately display the position of the conveyor table.
IRON CONTACT ROLLER

The iron contact roller is manufactured from
special steel, heat treated for minimum wear
and long service life. It is ideal for sizing and
heavy sanding applications.
　 　

AIR PAD

  1. In conjunction with the use of a frequency invertor, the machine can perform lacquered panel sanding operations.
  2. Suited for sanding veneer laminated panel.
　
(1) Drum only. (2) Platen only. (3) Drum and platen in
tandem.
SANDING HEAD CONFIGURATION

There are three types of sanding heads:

  1. Contact drum for sizing and intermediated finishing.
  2. Platen head for versatile sanding.
  3. Combination contact drum / platen head. Sanders can be furnished with one head or multi-head configurations. The most popular are D, A, DA, DD, AA, DDA, DAA model, but for higher production applications the multi-head are suggested.
SPECIFIC HEAD COMBINATION IS AVAILABLE UPON REQUEST.
MODEL PR-600D PR-600A PR-600DA PR-600DDA
2' CAPACITY
Working width 610mm 610mm 610mm 610mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 15HP 15HP 15,10HP 20,20,15HP
Feed motor 2HP 2HP 2HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min
Sanding belt size 25" x 75" 25" x 75" 25" x 75" 25" x 75"
Compressed air required 5 kg/cm² 5 kg/cm² 6 kg/cm² 6 kg/cm²
Exhaust volume requirement 1030 M³/Hr 1030 M³/Hr 2064 M³/Hr 3500 M³/Hr
Net weight 1200kg 1200kg 2000kg 2800kg
Gross weight 1500kg 1500kg 2450kg 3300kg
Dimensions: (LxWxH) 62" x 56" x 81" 62" x 56" x 81" 79" x 70" x 81" 100" x 70" x 80"
Packing size: (LxWxH) 65" x 59" x 85" 65" x 59" x 85" 82" x 73" x 84" 103" x 73" x 86"
MODEL PR-900D PR-900A PR-900DA PR-900DDA
3' CAPACITY
Working width 910mm 910mm 910mm 910mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 20HP 15HP 15,10HP 20,20,20HP
Feed motor 2HP 2HP 2HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min
Sanding belt size 37" x 75" 37" x 75" 37" x 75" 37" x 75"
Compressed air required 5 kg/cm² 5 kg/cm² 6 kg/cm² 6 kg/cm²
Exhaust volume requirement 1720 M³/Hr 1720 M³/Hr 2800 M³/Hr 5180 M³/Hr
Net weight 1440kg 1440kg 2800kg 3800kg
Gross weight 1850kg 1850kg 3250kg 4300kg
Dimensions: (LxWxH) 65" x 60" x 81" 65" x 60" x 81" 83" x 81" x 81" 100" x 84" x 81"
Packing size: (LxWxH) 68" x 62" x 87" 68" x 62" x 87" 86" x 85" x 85" 103" x 86" x 85"
MODEL PR-1100D PR-1100A PR-1100DA PR-1100DDA PR-1100DAA
3 1/2' CAPACITY
Working width 1100mm 1100mm 1100mm 1100mm 1100mm
Working height 125mm 125mm 125mm 125mm 125mm
Main motor standard 30HP 20HP 30,20HP 30,30,20HP 30,20,20HP
Feed motor 3HP 3HP 3HP 5HP 5HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1HP 1HP
Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min
Sanding belt size 43" x 84" 43" x 84" 43" x 84" 43" x 84" 43" x 84"
Compressed air required 5 kg/cm² 5 kg/cm² 6 kg/cm² 6 kg/cm² 6 kg/cm²
Exhaust volume requirement 2600 M³/Hr 2600 M³/Hr 5180 M³/Hr 7760 M³/Hr 7760 M³/Hr
Net weight 2200kg 2200kg 4000kg 4485kg 4850kg
Gross weight 2500kg 2500kg 4500kg 4850kg 5100kg
Dimensions: (LxWxH) 98" x 70" x 80" 98" x 70" x 80" 98" x 88" x 80" 98" x 88" x 80" 98" x 88" x 80"
Packing size: (LxWxH) 102" x 74" x 89" 102" x 74" x 89" 102" x 89" x 89" 102" x 89" x 89" 102" x 89" x 89"
MODEL PR-1300D PR-1300A PR-1300DA PR-1300DDA PR-1300DAA
4' CAPACITY
Working width 1300mm 1300mm 1300mm 1300mm 1300mm
Working height 125mm 125mm 125mm 125mm 125mm
Main motor standard 30HP 25HP 30,25HP 40,30,25HP 40,30,25HP
Feed motor 3HP 3HP 5HP 7 1/2HP 7 1/ 2HP
Table hoist motor 1/2HP 1/2HP 1HP 1HP 1HP
Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min
Sanding belt size 52" x 84" 52" x 84" 52" x 84" 52" x 84" 52" x 84"
Compressed air required 5 kg/cm² 5 kg/cm² 6 kg/cm² 6 kg/cm² 6 kg/cm²
Exhaust volume requirement 3500 M³/Hr 3500 M³/Hr 6860 M³/Hr 9870 M³/Hr 9870 M³/Hr
Net weight 2500kg 2500kg 4700kg 5050kg 5350kg
Gross weight 2800kg 2800kg 5200kg 5850kg 5880kg
Dimensions: (LxWxH) 107" x 70" x 83" 107" x 70" x 83" 107" x 88" x 80" 118" x 88" x 80" 118" x 88" x 80"
Packing size: (LxWxH) 109" x 74" x 89" 109" x 74" x 89" 109" x 89" x 89" 109" x 89" x 89" 109" x 89" x 89"
 

( STANDARD DUTY MODELS )
　
PANEL CLEANING BRUSH ROLLER
Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel.		 　 FEED CONTROLLED BY FREQUENCY INVERTER
Used for adjusting the sanding belt speed. (Use together with hollow shaft speed reducer)
　 　 　
　
VARIABLE SPEED UNIT
The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material,assuring superior sanding quality.		 　 SANDING BELT QUICK CHANGE DEVICE
The sanding belt is changed quickly for time saving and convenience.
　 　 　
　 　
CONVEYOR BELT TRACKING CONTROL
The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track.		 　 　
　 　 　
Refer to optional equipment list for-selecting
proper equipment as desired.
　
　
25A TYPE 　 37A TYPE
　 　 　
　
25, 37DA TYPE 　 43DA, 52DA TYPE

SPECIFIC HEAD COMBINATION IS AVAILABLE UPON REQUEST.
MODEL PR-25D PR-25A PR-25DA
2' CAPACITY
Working width 610mm 610mm 610mm
Working height 100mm 100mm 125mm
Main motor standard 10HP 10HP 15,10HP
Feed motor 1HP 1HP 2HP
Table hoist motor 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min
Sanding belt size 24" x 48" 24" x 48" 25" x 60"
Compressed air required 4 kg/cm² 4 kg/cm² 5 kg/cm²
Exhaust volume requirement 2575 M³/Hr 2575 M³/Hr 3090 M³/Hr
Net weight 660kg 660kg 1350kg
Gross weight 720kg 720kg 1600kg
Dimensions: (LxWxH) 53" x 50" x 63" 53" x 50" x 63" 74" x 54" x 70"
Packing size: (LxWxH) 56" x 54" x 70" 56" x 54" x 70" 78" x 57" x 76"
MODEL PR-37D PR-37A PR-37DA
3' CAPACITY
Working width 910mm 910mm 910mm
Working height 100mm 125mm 125mm
Main motor standard 20HP 15HP 20,15HP
Feed motor 2HP 2HP 2HP
Table hoist motor 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min
Sanding belt size 37" X 60" 37" x 60" 37" x 60"
Compressed air required 5 kg/cm² 5 kg/cm² 5 kg/cm²
Exhaust volume requirement 3090 M³/Hr 3090 M³/Hr 3500 M³/Hr
Net weight 900kg 900kg 1500kg
Gross weight 1150kg 1150kg 1900kg
Dimensions: (LxWxH) 64" x 53" x 73" 64" x 53" x 73" 74" x 64" x 70"
Packing size: (LxWxH) 67" x 56" x 78" 67" x 55" x 78" 78" x 67" x 76"
MODEL 43DA 52DA
3 1/2' /4' CAPACITY
Working width 1100mm 1270mm
Working height 150mm 150mm
Main motor standard 20, 15HP 20, 20HP
Feed motor 3HP 3HP
Table hoist motor 1/2HP 1/2HP
Feed speeds (Variable) 1-30 M/min 1-30 M/min
Sanding belt size 43" X 75" 52" x 75"
Compressed air required 5 kg/cm² 5 kg/cm²
Exhaust volume requirement 7760 M³/Hr 9870 M³/Hr
Net weight 2100kg 2500kg
Gross weight 2500kg 3000kg
Dimensions: (LxWxH) 70" x 82" x 77" 76" x 82" x 77"
Packing size: (LxWxH) 73" x 73" x 85" 80" x 73" x 85"
 

( SPIRAL CUTTERHEAD PLANER SANDER (HEAVY DUTY) )
　
MICRO-COMPUTER CONTROL WITH DIGITAL READOUT 　 SPIRAL CUTTERHEAD
Changing knife inserts are conveniently made without need of removing the cutterhead.
　 　 　
　
PANEL CLEANING BRUSH ROLLER
Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel		 　 SPIRAL CUTTERHEAD ELEVATION(Optional)
The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment.
　 　 　
　 　
SPIRAL CUTTER HEAD
The spiral cutter head is fitted with four edge throw away Tungestien Carbide knife inserts. It is precisely machined, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect.		 　 　
　 　 　
A COMBINATION OF PLANER AND SANDER
  • The first station is a knife planer head, followed with a contact drum head at second station, and platen head at third station.
  • Head configuration can be made to meet customer's requirement.
  • Choice of single, double or three heads.

SPECIFIC HEAD COMBINATION IS AVAILABLE UPON REQUEST.
MODEL PR-600N PR-600ND PR-600NA PR-600NDA
3' CAPACITY 　
Working width 610mm 610mm 610mm 610mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 20HP 20, 20HP 20HP,20HP 20,20,20HP
Feed motor 2HP 3HP 3HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min
Sanding belt size - 37" x 75" 37" x 75" 37" x 75"
Compressed air required 4 kg/cm² 5 kg/cm² 5 kg/cm² 6 kg/cm²
Exhaust volume requirement 1030 M³/Hr 2064 M³/Hr 2064 M³/Hr 3500 M³/Hr
Net weight 1200kg 2000kg 2000kg 2800kg
Gross weight 1500kg 2450kg 2450kg 3300kg
Dimensions: (LxWxH) 62" x 56" x 81" 79" x 70" x 81" 79" x 70" x 81" 100" x 70" x 80"
Packing size: (LxWxH) 65" x 59" x 85" 82" x 73" x 84" 82" x 73" x 84" 103" x 73" x 86"
MODEL PR-900N PR-900ND PR-900NA PR-900NDA
3' CAPACITY 　
Working width 910mm 910mm 910mm 910mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 20HP 20, 20HP 20HP,20HP 20,20,20HP
Feed motor 2HP 3HP 3HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min
Sanding belt size - 37" x 75" 37" x 75" 37" x 75"
Compressed air required 4 kg/cm² 5 kg/cm² 5 kg/cm² 6 kg/cm²
Exhaust volume requirement 1720 M³/Hr 3500 M³/Hr 3500 M³/Hr 5180 M³/Hr
Net weight 1400kg 2700kg 2700kg 3700kg
Gross weight 1810kg 3150kg 3150kg 4200kg
Dimensions: (LxWxH) 65" x 60" x 81" 83" x 81" x 81" 83" x 81" x 81" 98" x 84" x 81"
Packing size: (LxWxH) 68" x 62" x 87" 86" x 85" x 85" 86" x 85" x 85" 102" x 86" x 85"
MODEL PR-1100N PR-1100ND PR-1100NA PR-1100NDA
3 1/2' CAPACITY 　
Working width 1100mm 1100mm 1100mm 1100mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 25HP 25, 25HP 25,20HP 25,25,20HP
Feed motor 3HP 3HP 3HP 5HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1HP
Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min
Sanding belt size - 43" x 84" 43" x 84" 43" x 84"
Compressed air required 4 kg/cm² 5 kg/cm² 6 kg/cm² 6 kg/cm²
Exhaust volume requirement 2600 M³/Hr 5180 M³/Hr 5180 M³/Hr 7760 M³/Hr
Net weight 2000kg 3200kg 3200kg 4100kg
Gross weight 2300kg 3800kg 3800kg 4700kg
Dimensions: (LxWxH) 98" x 70" x 80" 98" x 88" x 80" 98" x 86" x 80" 98" x 103" x 80"
Packing size: (LxWxH) 102" x 74" x 89" 102" x 89" x 89" 102" x 89" x 89" 102" x 89" x 89"
MODEL PR-1300N PR-1300ND PR-1300NA PR-1300NDA
4' CAPACITY 　
Working width 1300mm 1300mm 1300mm 1300mm
Working height 125mm 125mm 125mm 125mm
Main motor standard 30HP 30, 30HP 30,25HP 30,30,25HP
Feed motor 3HP 5HP 5HP 7 1/2 HP
Table hoist motor 1/2HP 1HP 1HP 1HP
Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min
Sanding belt size - 52" x 84" 52" x 84" 52" x 84"
Compressed air required 4 kg/cm² 5 kg/cm² 5 kg/cm² 6 kg/cm²
Exhaust volume requirement 3500 M³/Hr 6860 M³/Hr 6860 M³/Hr 9870 M³/Hr
Net weight 2100kg 3500kg 3500kg 4600kg
Gross weight 2600kg 4000kg 4000kg 5400kg
Dimensions: (LxWxH) 107" x 70" x 75" 107" x 87" x 80" 107" x 87" x 80" 107" x 103" x 80"
Packing size: (LxWxH) 109" x 74" x 89" 109" x 89" x 89" 109" x 89" x 89" 109" x 89" x 89"
 

( SPIRAL CUTTERHEAD PLANER SANDER (STANDARD DUTY) )
　
SPIRAL CUTTERHEAD
Changing knife inserts are conveniently made without need of removing the cutterhead.		 　 CONVEYOR BELT TRACKING CONTROL
The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track.
　 　 　
　
SPIRAL CUTTERHEAD ELEVATION (Standard)
The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment.		 　 VARIABLE SPEED UNIT
The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality.

MODEL PR-25ND PR-25NA PR-25NDA
2' CAPACITY
Working width 610mm 610mm 610mm
Working height 125mm 125mm 125mm
Main motor standard 15, 15HP 15, 10HP 15, 15, 10HP
Feed motor 2HP 2HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP
Feed speeds